AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
5
1 General safety instructions
1.1 Duty of care of the operator
The AXIS4000 wheel alignment system has been designed and con-
structed according to pertinent, mandatory harmonised norms. It
therefore conforms to the latest status of technology and offers the
maximum degree of safety and reliability during operation.
Design modifications to the wheel alignment system may only be
made with the written approval of the manufacturer!
The practical safety of the system can only be ensured if all necessary
measures have been taken. It is the responsibility of the operator to
plan such measures and ensure their proper implementation.
The operator must in particular ensure that
•
the system is used properly in accordance with these instructions
•
the system is only operated when in proper working order
•
these operating instructions are always legible, complete, and
available where the system is in use
•
the system is operated only by qualified and authorised persons
who are familiar with these operating instructions!
•
personnel are trained regularly in all relevant aspects of health
and safety at work, and are familiar with the operating instruc-
tions, and in particular the safety instructions contained therein.
Before using the wheel alignment system, always check for visible
damage and only operate it when in proper working order! Any faults
found must be reported to the person in charge immediately!
The user is responsible for proper operation of the system and ob-
servation of all the relevant safety regulations.
Summary of Contents for 924 000 010
Page 2: ......
