Havis-Shields C-VS-0309-F250 Install Instructions Download Page 1

Page: 1 / 4

INSTALL INSTRUCTIONS C-VS-0309-F250

VEHICLE SPECIFIC CONSOLE

1999-2007 FORD F-250, 350, 450, 550

TOOLS REQUIRED:

Ratcheting wrench
Sockets Set
Cutting tool (if necessary)

Screwdriver set
T-20 torx bit

HARDWARE:
QTY DESCRIPTION

PART #

¼” x 1 ¼” Hex head bolt

GSM33003

¼” Flat washer

GSM31005

¼” Serrated nut

GSM30023

#8 x ¼” Phillips flat head sheet metal

GSM33178

Torx Screw kit

C-HK-1

Always

Read all instructions before installing any Havis-Shields Equipment Corp products.

Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

Use hardware provided with install kit

For product support, visit the Install Instructions Section of our website at

http://havis.com/Installation/Installation.html

, email

or call

1-800-524-9900.

Summary of Contents for C-VS-0309-F250

Page 2: ...Remove upper portion of dashboard as shown above Remove enough to expose hex screws holding lower portion of dashboard Remove 2 upper hex screws located under the upper portion of the trim Remove plastic trim piece as shown above Remove 2 screws as shown above ...

Page 4: ...sole w accessories Sold separately Brake controller Aux Switching equipment bracket C EB30 F50 1P Mic Clip Bracket C MCB w C MC Cup holder C CUP2 E C with additional L bracket CM93086 Remove this screw clip to allow a bolt to fit into this hole Attach lower portion of console using x 1 hex bolt washer and serrated nut ...