INSTALL INSTRUCTIONS C-TCB-10
1996-2006 FORD TAURUS
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Standard Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-10
1 Telescoping
pole
CM93072-1
1
Under floor plate
CM93132
1
Lateral support brace
CM93148
1
Side support brace
CM93149
2
¼-20 Nylock nut
GSM30016
1
5/16-18 Nylock nut
GSM30017
2
3/8-16 Nylock nut
GSM30018
4
¼” Flat washer
GSM31005
1
5/16” Flat washer
GSM31006
5
3/8” Flat washer
GSM31007
2
¼-20 x ¾” Hex head bolt
GSM33001
2
3/8-16 x ¾” Hex head bolt
GSM33027
1
3/8-16 x 1 ¼” Hex head bolt
GSM33029
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Remove front passenger seat base trim.
INSTALLATION:
1. MOUNT POLE SUPPORT ASSEMBLY:
•
Align pole support assembly’s slotted hole with similar slot on seat base and loosely
attach using 3/8-16 x ¾” bolt, washer and nut.
•
Loosely attach smaller slot on assembly to seat base using ¼-20 x ¾”
•
Repeat these processes attaching the side support brace to passenger seat base.
•
Now loosely attach the side support brace and lateral (forward) support base to pole
assembly using 5/16” Nylock nut.
