ESC2EYEST-US-INS-LAB-RevA20 27
3.10 PUSH HANDLES
Push Handles
are locked and stowed away
when not in use (Figure 3.10-1). They are held
in place by the
Push Handle Retention Clips
,
shown in Figure 3.10-3, when not in use, and
released by the
Push Handle Release Plunger
located at back top left (Figure 3.10-2).
Push
Handles
may be operated with the back in
either raised or lowered position (Figures
3.10-3 — 3.10-6).
3.10.2 Operating the Push Handles
Releasing and Lowering the Push Handles
Pull out and hold the
Push Handle Release
Plunger
(Figure 3.10-2), pull
Push Handles
free from
Push Handle Retention Clips
(Figure
3.10-3), and rotate
Push Handles
down to
desired position (Figure 3.10-3).
Rotating and Positioning the Hand Grips
The
Hand Grips
(Figure 3.10-5) rotate 360°
in 10° increments. To rotate the
Hand Grips
,
hold them firmly (Figure 3.10-4), press the
black button on each
Hand Grip
(Figure 3.10-
5), rotate them to desired position, (Figures
3.10-3 and 3.10-4; Figures 3.10-6 and 3.10-7),
and release the button.
Raising and Stowing the Push Handles
Rotate
Hand Grips
to stored position flush
with
Push Handles
(Figure 3.10-1). Pull out
and hold the
Push Handle Release Plunger
(Figure 3.10-2), rotate
Push Handles
to stored
position (Figure 3.10-1), and gently press
Push
Handles
until they lock into
Push Handle
Retention Clips
(Figure 3.10-3).
WARNING: To prevent unintended
interference, ensure Push Handles are
stored as instructed when not in use.
Figure 3.10-1
Figure 3.10-2
Figure 3.10-3
Figure 3.10-4
Figure 3.10-5
Figure 3.10-6
Figure 3.10-7
