manualshive.com logo in svg

Hausted EPC500ST, Operating Manual

Share
Download
Hausted EPC500ST Operating Manual Download Page 5

EPC500ST-INS-LAB-RevA21 5

1  LIST OF WARNINGS AND CAUTIONS

 IMPORTANT: Before using the Hausted EPC500ST Procedure Chair, please read and adhere 

to the following safety precautions and warnings. Failure to do so could result in serious 

personal injury or damage to the EPC500ST Procedure Chair.

Always consult your healthcare professional to determine safe methods most suitable for your 
individual abilities. Protect yourself, your attendant, and the Hausted EPC500ST Procedure Chair 
by having it serviced regularly. If you experience any malfunction, contact your Graham-Field 
authorized distributor immediately, as a hazardous condition could result, causing personal injury 
or damage to the Hausted EPC500ST Procedure Chair.
Periodic inspection, adjustment and replacement of worn parts are necessary to provide years of 
excellent service. Maintenance MUST be performed by qualified personnel ONLY.

SAVE THESE INSTRUCTIONS.

SIGNIFICANCE OF SAFETY STATEMENTS

Please note the following special statements, used throughout this manual, and their significance:

 DANGER: Indicates a potential hazard situation or unsafe practice that, if not avoided, will 

result in death or serious personal injury.

 WARNING: Indicates a potential hazard situation or unsafe practice that, if not avoided, 

could result in death or serious personal injury.

 CAUTION: Indicates a potential hazard situation or unsafe practice that, if not avoided, 

could result in minor or moderate personal injury.

s

  NOTICE: Indicates a potential hazard situation or unsafe practice that, if not avoided, could 

result in product or property damage.

Info: Provides application recommendations or other useful information to ensure that you get 

the most from your product.

DANGER / WARNING / CAUTION / NOTICE Summary

The following is a listing of the safety precautions which must be observed when operating and 
servicing this equipment. These precautions are repeated (in whole or in part), where applicable, 
throughout the manual.

WARNING: To Reduce the Risk of Burns, Fire, Electric Shock, or Personal Injury 

 DANGER: SHOCK HAZARD — To reduce the risk of electric shock, unit is to be serviced by 

qualified personnel only. 

 DANGER: SHOCK HAZARD — To avoid risk of electric shock, this equipment must only be 

connected to a supply mains with protective earth.

 WARNING: LACERATION HAZARD — When cutting bands always use a tool specifically 

designed for that purpose. This will help to avoid personal injuries frequently incurred 

when bands are cut and tension released.

Summary of Contents for EPC500ST













































Reviews:

No comments

Brands by name

Popular brands

Load more brands