EPC500ST-INS-LAB-RevA21 28
3.10 COMMON OPTIONAL
ACCESSORIES
3.10.1 Installing the IV Rod
Remove the
IV Rod
from the clips located on
the base (Figure 3.10-1). Insert
IV Rod
into
preferred IV well — there are two sockets
on both sides of chair (Figure 3.10-2). Return
IV Rod
to storage clips when not in use
(Figure 3.10-1).
3.10.2 Using Safety Straps
Locate both ends of the
Safety Strap
, on each
side of the chair. One half of the strap has a
clamping buckle and the other half is a bare
strap with a square loop (strap is folded back
on itself and sewn) on the end.
1. Pull on the clamp to open the clamping
buckle.
2. Feed the bare strap through the buckle
slot where the clamp pivots away from the
base.
3. Pull on the bare strap until the patient is
secure.
4. Close the clamp to lock the strap in place
(Figure 3.10-3).
Figure 3.10-2
Figure 3.10-1
Figure 3.10-3
