5.
Firing up
Ignite a wood shaving bundle and put it on
the pellets.
6.
Move the burner cartridge back in
Push the burner cartridge back into the
housing.
7.
Adjusting bolt
Push the burner cover with the adjusting
bolt downwards until it stops.
Pull out the adjusting bolt.
8.
Close the doors
Close the doors and use the clamp fasteners
to lock them.
i
The patio heater requires approx. 15 min. to develop a full flame. While the flame
is developing, you may hear hissing similar to that of a Bunsen burner. The noise
dies down as soon as the flame has fully developed. Afterwards, the hissing noise
is audible but very weak.
i
The burning period of approx. 3.5 hours may vary by up to 30 min. depending on
external conditions (air pressure, wind, and temperature).
After each use, remove the ashes from the burner cartridge and firing chamber of
the patio heater.
17
Filling and firing up
