WinTV-NOVA-s pci
Quick Installation Guide
To install, switch off the
computer.
Remove the computer cover.
The manufacturer of your PC
supplies instructions on
removing the PC cover.
Step 1: Install the WinTV-NOVA-s board
Locate a free PCI slot
(a short white slot).
Unscrew and remove the metal
cover plate which covers the
back of the empty slot.
Plug the WinTV-NOVA-s board
into the PCI slot, and screw the
WinTV-NOVA-s metal cover
plate to the PC.
Replace the computer cover.
1. Start your PC. When it is completely booted, the
Add New Hardware Wizard
will appear. Click
Next
.
2. Select
Search for the best driver for your device (Recommended)
.
Click
Next
.
3. When you see the dialog box, insert the
WinTV-NOVA-s Installation CD-ROM
into your CD-ROM drive. Select
CD-ROM drive
and click
NEXT
.
4. Once the
WinTV-NOVA-s
video
driver has been detected, click
NEXT
. You will see a number of
files being copied to your hard
disk drive. Click
FINISH
.
Note:
under Windows XP, if you see
a
Hardware Installation
box,
click the “
Continue anyway
” but-
ton to continue the installation.
Page 2
Page 3
Step 3: Install the WinTV-NOVA-s driver for Windows
98, WindowsMe, Windows2000 and Windows XP
Page 1
Page 4
Step 2: Connecting an Aerial
Connect your LNB cable from your satellite
antenna to the
LNB connector
on the
WinTV-
NOVA-s
board.
To install
WinTV-NOVA-s
under Windows XP, Windows98, WindowsMe or Win-
dows2000, follow these steps:
1. Prepare the computer and insert the
WinTV-NOVA-s board
2. Plug your satellite cable into the
WinTV-NOVA-s LNB Connector
.
3. Start your PC and install the drivers from the supplied
WinTV-NOVA-s Installa-
tion CD-ROM
4. After the
WinTV-NOVA-s
driver is installed, install the
WinTV-NOVA-s
application software
from the
Installation CD-ROM
.
Step 5: The Digital TV Application
LNB F-type connector
Hauppauge Computer Works, Ltd
Telephone: (+44) 207-378-1997
6-10 Bank Chambers
Fax: (+44) 207-357-9171
Borough High Street
Tech Support: (+44) 207-378-0202
London, U.K. SE1 9QQ
Hauppauge Computer Works, Inc
Telephone: (+1) 631-434-1600
91 Cabot Ct.
Fax: (+1) 631-434-3198
Hauppauge, NY 11787 USA
Tech Support: (+1) 631-434-3197
Hauppauge Digital Asia, Pte. Ltd.
Telephone: (+65) 276-9163
Blk 1093, Lower Delta Road #04-05
Fax: (+65) 276-9167
Tiong Bahru Industrial Estate
Tech Support: (+65) 276-4412
Singapore 169204
To start the WinTV-NOVA-s application, click
Start / Programs / Hauppauge
WinTV-NOVA / TV.
Installation Overview
See
Troubleshooting notes
if the
Frontend Status
does not become highlighted
or if no channels appear in the channel list.
When the scanning is completed, click on
Store List
and
OK
to save the channel
list.
When a strong digital TV signal is detected, the
FRONT END Status
will become
highlighted (Dark Blue) and a
Scanning PSI tables box
will appear.
When running
WinTV-NOVA-s
for the first time, you will need to scan for your TV
channels (the Crystal Palace transmitter is selected by default).
Click on the
Satellite ICON
and select
AUTOSCAN
.
Select your geographic
REGION
and local transmitter
STATION
.
Note :
IF YOU ARE NOT SURE, YOU CAN SELECT
ALL STATIONS.
1. To start the
WinTV-NOVA-s
software
installation, click
Start / Run
then type
X:\setup.exe
(X being the driver letter of
your CD-ROM drive) and then
Setup.exe
Chose a language, and click
Next
to
install the decoder software (which may
take some time).
2. After the Setup program is complete, you
will need to reboot your PC.
After rebooting, you will see the
InterVideo WinDVD icon
on your Windows
desktop and the Hauppauge
WinTV-NOVA-s pci
in the Program menu (see
below).
Satellite ICON
Opens Channel Scan
menu
Big Picture
Shows TV image in full
screen mode
Small Picture
Center's TV image in
application window
Flags
Language selection for
control bars.
Step 3: Install the WinTV-NOVA-s application software