4.5. Connecting the Power Supply
Please ensure you have read and fully understood the 'Important Information
and Safety Notes' located (SECTION X) at the front of this manual before
proceeding to the next step.
Do NOT switch on the mains power until AlL the connections have been made.
Plug the connector from the supplied 12V DC power supply unit into the Power
supply socket on the DEC2000-t. Plug the other end into the mains power socket,
and switch on only after you have made sure that all connections have been made.
Once all cable connections have been made, then plug the power supply into the
electricity point.
- 19 -