Haulotte STAR 10, Maintenance Book

Page: 12 / 166

12 4000414930 E 10.15 USA / GB
STAR 8 - STAR 22J - STAR 10 - STAR 26J
B
- Safety
1.3 - ELECTROCUTION HAZARDS
The machine is not electrically insulated and does not provide protection from contact or proximity to
electrically charged conductors.
Always position the lift at a safe distance from electrically charged conductors to ensure that no part of
the machine is within an unsafe area.
Respect the local rules and the minimum safety distance from power lines.
M i n i m u m s a f e a p p r o a c h d i s t a n c e s
N.B.-:-T
HIS TABLE IS APPLICABLE
,
EXCEPT WHEN THE LOCAL REGULATIONS ARE MORE STRICT
.
Electric voltage Minimum safety distance
Mètre Feet
0 - 300 V Avoid contact
300 V - 50 kV 3 10
50 - 200 kV 5 15
200 - 350 kV 6 20
350 - 500 kV 8 25
500 - 750 kV 11 35
750 - 1000 kV 14 45
Do not operate the machine :
• Do not operate the machine when close to live power lines, consider the
movement of the machine and the sway of the electric power lines particularly in
windy conditions.
• Do not operate the machine during lightning, thunderstorms, snow/ice or any
weather condition that could compromise operator safety.
• Do not operate the machine during lightning or storms.
• Do not use the machine as a welding earth.
• Do not wash electrical components with a high pressure washer.
• Do not weld on the machine without first disconnecting the battery terminals.
• The machine must not be used while charging the batteries.
• When using the platform AC power line, ensure it is protected with a circuit
breaker.
Keep away from the machine if it contacts energized power lines. Personnel on the
ground or in the platform must not touch or operate the machine until energized
power lines are shut off.
In the event of accidental contact with a high voltage line, wait for the power to the
line be de-energized before attempting to operate the machine.