Haulotte HA12CJ, Operator'S Manual

Page: 53 / 106

A
B
C
D
E
F
G
H
I
53 4000827180 E 09.18 USA / GB
C
- Pre-operation inspection
HA12CJ - HA32CJ - -
3 - Inspection and Functional test
3.1 - D
AILY INSPECTION
Each day before the beginning of a new work session and with each change of operator, the machine
must be subjected to a visual inspection and a complete functional test.
In case of loose fasteners, refer to torque table value in maintenance book.
In case of leaks, replace the damaged part before use.
In case of structural part deformation (cracks, broken weld, paint chips) replace the part before use.
S a m p l e o f b r o k e n w e l d s
We recommend these forms to be completed daily and stored to assist with your maintenance
schedule.
Each action is depicted in the daily inspection sheet using the following symbols.
Use the detailed program below.
• Never use a defective or a malfunctioning aerial work platform.
• If any item on the check list is marked "No" during the inspection; machine must be tagged and placed
out of service.
• Do not operate the machine until all identified items are corrected and it has been declared safe for
operation.
Oil change Lubrication-Lubrication Tightening
Levelling Systematic replacement
Functional adjustments /
Checks / Cleaning
Visual inspection To check by test