214
2420344510 E
11.11
AUS
Telescopic handlers
H
- Lubrication and maintenance
14.5 - BUCKET BLADE (OPTION)
Description of the wear :
The blade is considered to be worn and requires changing when :
• The length has reached two thirds of the initial size, i.e 100 mm for 150 mm initially.
• And/or the average remaining thickness is only 50 % of the initial value, i.e. 10 mm.
Changing the blade :
When the corners of the bucket blade reach 50 % of their initial value and are displaying signs
of precipitated wear, the blade must be changed.
N.B.
-:-Blade on the toothed bucket : If teeth are regularly checked and replaced, the blade may be
replaced every 800 h, except if it is being used for working on the flat which causes rapid wear of the
thickness (e.g. working on a concrete slab).
The blade must be replaced every 500 h.
Check the corners of the blade regularly.
The blade must be replaced by a qualified, authorised person.
Contact HAULOTTE Services®.
Summary of Contents for HTL 3210
