143
2420344510 E
11.11
AUS
Telescopic handlers
F
- Emergency procedure
For HTL3510 only :
Tools required :
• Spanner 19 mm.
1.2.2 - Parking brake reactivation
on HTL4010 and HTL3210 only :
Tools required :
• BTR 8 mm wrench.
• Reversible 3/8'' ratchet and 3'' extension.
When the four wheels are properly blocked :
• Loosen nuts ( 1-2-3 ) under the axle successively anticlockwise in half turns.
• Continue loosening them in ½ turns until the torque suddenly decreases.
• Loosen screws ( 1-2-3 ) alternatively anticlockwise until the screw heads brush against the top of the
special screws.
• Tighten nuts ( 1-2-3 ) clockwise by a quarter of turn.
The parking brake can then be reactivated and the front wheels blocked.
• Remove the chocks from the four wheels.
• Check that the hand brake control functions properly.
For HTL3510 only :
Tools required :
• Spanner 19.
• Loosen the 4 screws from 18 mm to 21 mm.
• Tighten the lock nuts.
• Loosen the lock nuts.
• Fully tighten the 4 screws.
Block the four wheels with chocks to prevent any Telehandler movement when the brake is disengaged
Summary of Contents for HTL 3210
