106
2420344510 E
11.11
AUS
Telescopic handlers
E
- Attachments
• To be used when lifting a load with the stabilisers lowered.
HTL4010 - HTL3210 load capacity chart for lowered stabilisers (Values given for information only)
5.7.6 - Operation instructions
Do not use the fork carriage to pull loads.
Do not raise the boom unless the chassis is level (0 °).
Do not use the fork carriage to pull loads.
Never use an attachment without first having made yourself familiar with the load capacity chart supplied
by HAULOTTE® on the handler (Load chart located on the left hand dashboard in the handler). Failure to
install the relevant HAULOTTE® supplied capacity chart could cause an accident resulting in death or
serious injury.
The side-shift fork carriage must only be mounted on a suitable machine bracket.
This accessory is not designed to "shovel up" loads, i.e. pull a load laterally.
It is strictly forbidden to move the load (drive the telescopic handler) with the fork carriage in the high
position.
Summary of Contents for HTL 3210
