Haulotte Group HTL 3210, Operator'S Manual

Page: 103 / 248

103
2420344510 E 11.11 AUS
Telescopic handlers
E
- Attachments
5.7.2 - Technical characteristics
Side-shift fork carriage, designed to operate under dynamic and static load conditions.
Side-shift fork carriage
5.7.3 - Side-shift fork carriage control
The joystick (P211) controls movements of the boom and attachment tilt ( Section C 2.5.8
-Joystick).
5.7.4 - Attachment installation procedure
Section E 5 - Attachment installation.
The safety coefficient used is in compliance with the legislation on lifting apparatus or attachment tests.
Characteristics Metric Imperial
Overall width of machine 1,25 m (4 ft10 in)
Height of fork carriage
alone
0,839 m (2 ft75 in)
Overall height of machine 0,915 m (3 ft0 in)
Length of fork carriage
alone
0,356 m (1 ft17 in)
Overall length of machine 1,6 m (5 ft25 in)
Tare weight 390 kg (860 lb)
User pressure 180 bar (2610,67 psi)
Maximum permissible
pressure
220 bar (3190,83 psi)
Minimum flow 50 l/min
Standard : FEM3A
Dimensions of pallet forks
Section 0,125 m x 0,045 m m( ft41 in) x m( ft15 in)
Length 1,2 m (4 ft0 in)
Height 0,645 m (2 ft11 in)
Fork capacity 4700 kg (10362 lb)
Maximum static load 3000 kg (6614 lb)
Never fit pallet forks onto the fork carriage with dimensions exceeding 0,125 m(0 ft41 in) x 0,45 m(0 ft15 in)
x 1,2 m(4 ft0 in) for a maximum permissible load capacity of 4700 kg(10362 lb) as the tool is designed for
forks of standard FEM3A ( A or B).
Ensure that the hydraulic hoses are connected correctly.
Incorrect installation could result in the attachment or load disengaging, causing death or serious injury.
Never start up the accessory when other people are nearby.
Before using the attachment for the first time, operate the fork carriage empty and check that it travels
correctly.