Haulotte Group H14TX, Maintenance Book

Page: 65 / 120

65
4000364740 E12.16 USA / GB
Replacement
Hydraulic filter cartridge
E003
15 min
Replacement
Hydraulic filter cartridge
1 - You will need
2 - Preliminary procedure
1. Place the machine in maintenance configuration. 3.3.1-Placing the machine in maintenance
configuration
3 - Replacement
4 - Additional operation
1. Place the machine in its operating configuration. 3.3.2-Placing in operating configuration
• Standard tool kit
• Protective goggles
• Gloves
• Place barriers around the perimeter of the
work area
Clogging must be checked when hot. When cold, oil viscosity may simulate filter clogging.
Do not touch the hot parts of the hydraulic power source (engine, filters, etc.).
1. When the clogging indicator ( 2 ) comes on, replace
the cartridge ( 1 ).
2. Loosen and remove the base nut ( 3 ).
3. Loosen and remove the cartridge ( 1 ).
4. Screw in a new cartridge.
5. Refit and tighten the base nut ( 3 ).
6. Reset the clogging indicator ( 2 ) by pressing it until it
becomes green again.