manualshive.com logo in svg

HAUL MASTER 93228, Assembly & Operating Instructions

Share
Download
HAUL MASTER 93228 Assembly & Operating Instructions Download Page 1

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright

©

 2005 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or

any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

®

4” RED FLUSH-MOUNT TAIL LIGHT

4” AMBER FLUSH-MOUNT TAIL LIGHT

Due to continuing improvements, actual product may differ slightly from the product described herein.

93228
93229

Summary of Contents for 93228

Page 1: ...of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 4 RED FLUSH MOUNT TAIL LIGHT 4 AMBER FLUSH MOUNT TAIL LIGHT Due to continuing improvements actual product may differ slightly from the product described herein 93228 93229 ...

Page 2: ...tructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions Keep work area well lighted 3 Store idle equipment When not in use the Tail Lights must be stored in a safe and clean location Always lock up products and keep out of reach of children 4 Use the right product for the job There are certain applications for which the Flush Mount ...

Page 3: ... described in the Parts List and Assembly Diagram located on page 4 of this manual If you do not have experience doing this type of electrical work the job should be done by an automotive service technician 1 Make certain that the vehicle s engine is OFF before doing any maintenance Proceed with the following steps for installing the 4 Flush mount Tail Lights 2 Use a pin connector or inline splice...

Page 4: ...HERETO Installing the Light Bulb 1 Use a light bulb of the type described on page 2 Gently grasp and twist the Bulb Housing 2 and pull it out from the main Tail Light 1 see Figure 1 2 Line up pins on the light bulb with the grooves on the Bulb Housing 2 and slide the Light Bulb into place 3 Verify that the Light Bulb is securely in place Thread the Bulb Housing back into the main Tail Light 1 Note...

Reviews:

No comments

Brands by name

Popular brands

Load more brands