HAUL MASTER 44649 Set Up And Operating Instructions Manual Download Page 3

Page 3

For technical questions, please call 1-800-444-3353.

SKU 44649

Store idle equipment

7. 

.  When not in 

use, store ramps in a dry location to 

inhibit rust.

Dress properly

8. 

.  Do not wear 

loose clothing or jewelry.  Protective 

clothes and nonskid footwear are 

recommended when working.  Wear 

restrictive hair covering to contain 

long hair.

Wear AnSI-approved impact 

9. 

safety goggles, a safety helmet, 

and heavy-duty work gloves when 

loading, unloading or handling 

ramps. 

Keep proper footing and balance 

10. 

when loading or unloading.

use as intended only.

11. 

  Do not use 

as a ladder.  Do not modify this 

product.

Stay alert

12. 

.  Watch what you are 

doing, use common sense. Do not 

use any ramp when you are tired.

Check for damaged parts

13. 

.  Before 

using any ramp, any part that 

appears damaged should be carefully 

checked to determine that it will 

perform its intended function. Check 

for any broken parts or mounting 

fixtures and any other condition that 

may affect proper operation. Any part 

that is damaged should be properly 

repaired or replaced by a qualified 

technician.

Replacement parts and 

14. 

accessories

.  When servicing, use 

only identical replacement parts. 

Use of any other parts will void the 

warranty.  Only use accessories 

intended for use with this ramp.

Do not use ramp if under the 

15. 

influence of alcohol or drugs

.  

Read warning labels on prescriptions 

to determine if your judgment or 

reflexes are impaired while taking 

drugs. If there is any doubt, do not 

use the ramp.

Use Ramps on a solid, level, flat, dry 

16. 

surface. The flange must face down 

and the 

Tongue (2) 

edge must fully 

contact the tailgate.
Before each use, clean dirt, oil, and 

17. 

any debris off ramps.
The warnings, cautions, and 

18. 

instructions discussed in this 

instruction manual cannot cover all 

possible conditions and situations 

that may occur. It must be understood 

by the operator that common sense 

and caution are factors which cannot 

be built into this product, but must be 

supplied by the operator.

ReV 03d, 06f, 09e

Summary of Contents for 44649













Reviews: