manualshive.com logo in svg

HAUL MASTER 44649, Set Up And Operating Instructions Manual, Page: 2 / 12

Share
Download
HAUL MASTER 44649 Set Up And Operating Instructions Manual Download Page 2

Page 2

For technical questions, please call 1-800-444-3353.

SKU 44649

SAVe ThIS MAnuAL

Keep this manual for the safety 

warnings and precautions, assembly, 

operating, inspection, maintenance and 

cleaning procedures.  Write the product’s 

serial number in the back of the manual 

near the assembly diagram (or month 

and year of purchase if product has no 

number).  Keep this manual and the 

receipt in a safe and dry place for future 

reference.

IMPORTAnT SAFeTY 

InFORMATIOn

In this manual, on the labeling, 

and all other information 

provided with this product:

  This is the safety alert 

symbol.  It is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

DAngeR indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

WARnIng 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

CAuTIOn, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.
 

nOTICe is used to 

address practices 

not related to personal injury.
 

CAuTIOn, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

 WARnIng!  Read all instructions

 

Failure to follow all instructions 

listed below may result in serious 

injury and/or DeATh.

SAVe TheSe InSTRuCTIOnS

Load vehicle slowly.  Do not ride a 

1. 

vehicle up or down the load ramp.
All persons not involved in the 

2. 

loading process must stand 

clear of the loading ramps.  Keep 

children away

.  Children must not be 

allowed in the work area.

Do not exceed the 1000 lb. per 

3. 

pair, or 500 lb. per Ramp maximum 

weight capacity.

  Doing so can result 

in personal injury and/or damage 

to the ramp.  Be aware of dynamic 

loading!  If the load drops or bounces 

it may briefly create excess load 

causing product failure.

Check maximum tailgate weight 

4. 

capacity.

  Do not exceed tailgate 

capacity if less than 1,000 lb.

Avoid working alone

5. 

.  If an accident 

happens, an assistant can bring help.

Keep work area clean and well 

6. 

lit

.  Cluttered and dark areas invite 

injuries.

Summary of Contents for 44649













Reviews:

No comments