Transport, assembly and commissioning
3H50, 4H50
52
HATZ
Manual
▪ Parts of the exhaust gas system and the engine surface become hot dur-
ing operation and may not be touched until they cool down after the en-
gine is switched off.
▪ Incorrect cable connections and incorrect operation of the electrical equip-
ment can lead to sparking and must be avoided.
▪ After the engine is installed in the machine, rotating parts must be pro-
tected against contact.
HATZ safety equipment is available for the belt drive of the cooling fan and
alternator.
▪ Comply with all notices and warning labels on the engine and keep them
in a legible condition. If a label should become detached or difficult to
read, it must be replaced promptly. For this purpose, contact your nearest
HATZ service station
.
▪ Any improper modification of the engine will result in a loss of liability cov-
erage for resulting damage.
Only regular maintenance, as specified in this manual, will maintain the op-
erating readiness of the engine.
The
assembly instructions
contain important information on how to safely
assemble the engine. They are available from any
Hatz service station
.
If you have any questions, please contact your nearest
HATZ service sta-
tion
before commissioning the engine.
6.3
Preparations for commissioning
▪ Check the delivered parts for completeness, damage, and other noticeable
issues.
▪ Ensure that the setup location is adequately ventilated.
DANGER
Danger to life from inhaling exhaust gases.
Toxic engine exhaust gases can lead to loss of consciousness
and even death in closed-off and poorly ventilated rooms.
▪
Never operate the machine in closed-off or poorly ventilated
rooms.
▪
Do not breathe in the exhaust gases.
