20
www.hatteland.com
INB100011-1 (Rev 4)
IND100129-41
Specifications - JH 12T01 MMC
Note: All specifications are subject to change without prior notice!
On front bezel:
• Power On/Off (push button with internal LED)
• Brightness Knob Wheel
Accessories:
• Touch Screen **
* Option: Standard or custom logo and color
** Option: Factory mounted
• Operating
: Temperature -15 deg. C to +70 deg. C
: (+70 deg. C non functional)
Humidity 30% to 90% (non condensing)
• Storage
: Temperature -20 deg. C to +70 deg. C
Humidity 10% to 90% (non condensing)
Function
Back side
Inside
Front
10/10 BaseT
1 x RJ-45
Keyboard
1 x PS/2
Mouse
1 x PS/2
COM 1
1 x DB9M
COM 2
Reserved for touchscreen
USB
2 x Std USB 1.1
DC Power
DC Screw terminal
RGB OUT
1 x HDDB15F
• 320 (W) 288 (H) 62 (D)
• Weight: 4.4kg
• 12.1 inch viewable image size
• Thin Film Transistor (TFT)
• a-Si TFT Active Matrix
• Pixel number : 800 x 600
• Pixel pitch (RGB) : 0.3075 (H) x 0.3075 (V) mm
• Response Time : 25 ms (typical), “black” to “white”
• Contrast Ratio : 600:1 (typ)
• Light Intensity : 400 cd/m2 (typical)
• Active Display Area :
246.0 (H) x 184.5 (V) mm
• Max Colors : 262,144 colors
• Viewable Angles : Up: 45°, Down: 55°, Right: 70°, Left: 70°
• Resolutions : 800 x 600
• Processor : National Geode GX1 300Mhz with MMX
• Cache / PCI Clock : 16KB Cache Level 1 / 33 MHz BUS
• System Chipset : National CS5530A
• BIOS : P Kontron Technology
• Memory : 1 x 128 MB (MAX 256MB) PC133 SDRAM
• Graphics Chipset : XPRESS Graphics
National CS5530A with 4MB RAM
• IDE Controller : 2 x IDE Ports, Ultra DMA33
• IDE HDD : Fujitsu Automotive 20 GB internal,
2.5" IDE, 5400 RPM
• Compact Flash : 1 x CF Socket (Type I & II)
• Serial Port : 1 x RS232/RS422/RS485 (NS16550 UART)
• Ethernet : 1 x 10/100 Mbps (Realtek 8139C)
• USB : 2 x USB (USB 1.1 compliant, 12 MBit)
(USB Legacy not supported)
• Keyboard : 1 x PS/2
• Mouse : 1 x PS/2
• Speaker : Build in speaker
• Alarm : Build in Buzzer (controlled by parallel port)
Power Supply Options:
• 24 VDC
: Model JH 12T01 MMC A4*
*Tested according to EN60945 and IACS E10
Power Consumption:
• Operating : 31W (Typ)
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
T E C H N I C A L D E S C R I P T I O N
M E C H A N I C A L D E S C R I P T I O N
User Controls:
Available Mechanical Options:
Environmental Considerations:
Input/Output Connectors:
Physical Dimensions:
TFT Technology:
TFT Characteristics:
Computer Specifications:
Power Specifications:
Summary of Contents for JH 12T01 MMC
