![Hatteland JH 10T06 MMD User Manual Download Page 40](http://html1.mh-extra.com/html/hatteland/jh-10t06-mmd/jh-10t06-mmd_user-manual_2107349040.webp)
0
INB100005-1 (Rev 19)
IND100129-5
Specifications - JH 20T03 MMD (DVI)
A P P R O V A L S & C E R T I F I C A T E S
TFT Technology:
• 20.1 inch viewable image size
• Active Matrix
• Thin Film Transistor (Super-TFT)
Synchronisation:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> SXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal
: 31,5 kHz to 91,1 kHz
• Vertical
: 60 Hz * to 85 Hz
* Recommended for optimum picture quality
TFT Characteristics:
• Pixel Number : 1280 x 1024
• Pixel Pitch (RGB) : 0.312 (H) x 0.312 (V) mm
• Response Time : 25 ms (typical), “black” to “white”
• Contrast Ratio : 300:1 (typical)
• Light Intensity : 250 cd/m2 (typical)
• Viewable Angle : +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area :
399.36 (H) x 319.49 (V) mm
• Max Colors
: 16.7 millions (depending on graphics card)
Supported Signal Inputs:
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024 *
Video Signals:
• Interlaced NTSC and PAL/SECAM video
• Composite video
• S-Video
* Recommended for optimum picture quality
Power Specifications:
Power Supply Options:
• 115 & 230VAC - 50 / 60Hz
: Model JH 20T03 MMD A1
• 24 VDC
: Model JH 20T03 MMD A2
Power Consumption:
• Operating
: 100 W (max)
This product have been tested / type approved by the following classification societies:
EN60945 3rd
(IEC945 3rd)
LRS
- Lloyd's Register of Shipping
ClassNK
- Nippon Kaiji Kyokai
ABS
- American Bureau of Shipping
GL
- Germanischer Lloyd
DNV
- Det Norske Veritas
BV
- Bureau Veritas
RS
- Russian Maritime Register of Shipping
EN60529
(IP66) (Applies only for flush mounting)
EN61174 (IEC1174)
- Bundesamt für Seeschiffahrt und Hydrographie (BSH)
On front bezel:
• Power On/Off (push button)
• Brightness Control
• 2 x hotkeys
• Mode Status LED
Behind hatch:
• On Screen Display control (OSD/OSM)
User Controls:
• JH MMD BR
= Bracket *
• JH MMDRO
= Rotary Bracket *
• JH 20TSV
= Sun Visor *
• JH VESA 20T03 = Vesa Bracket *
• JH VBUF
= Video Buffer
(1)
• JH SCOM
= Remote Control
• JH XPR = External Power Relay
• ECDIS Version = JH 20T03 MMD E1
• Touch Screen = Factory mounted
*Option: Standard or custom logo and color
*Option: See separate datasheet for specifications on bracket options.
(1)
The JHVBUF is tested at resolutions up to 1600 x 1200. Both separate sync and
composite sync is supported. The VGA output signal is at same resolution and sync as
the input. The output is working even if the main display is turned off. (Power supply
must be connected though)
Available Options:
Environmental Considerations:
• Operating
: Temperature -15 deg. C to +55 deg. C
Humidity 30% to 90% (non condensing)
• Storage
: Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)
Input Signal Terminal:
• DVI-D (PC) signal : DVI-D Input 24pin Connector
• RGB (PC) signal : 15pin mini D-SUB (female - Input)
• Composite Video : RCA Phono plug
• S-Video signal : S-Video (SVHS) plug
• AC Power signal : Std IEC Inlet Model JH 20T03 MMD A1
• DC Power signal : Screw terminal Model JH 20T03 MMD A2
Accessories:
• Touchscreen
: 1 x D-SUB 9P Connector (female)
• Remote Control : 2 x D-SUB 9P Connectors (female)
Physical Dimensions:
• 534 (W), 481 (H), 79.50 (D) mm
• Weight: 14 kg (approx w/bracket)
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Compass Safe Distance:
JH 20T03 MMD-A1
Standard: 200cm Steering: 135cm
M E C H A N I C A L D E S C R I P T I O N
T E C H N I C A L D E S C R I P T I O N
Note: All specifications are subject to change without prior notice!
Summary of Contents for JH 10T06 MMD
