background image

HATCH X-RAY Operating Manual

28

4.7.  Exposure Delivery Procedure

The moment the console displays the Home screen, the unit is ready to deliver 

an exposure. This section describes the preparations that can be done before 

delivering an exposure and what happens during the procedure.

NOTE

In order to avoid accidental exposure, the user is advised to put the 

console in the mode selection screen. (

“Figure 15”

).

Figure 9 : Home screen

Bring the console back to home screen by pressing 

the MODE key. If necessary, make the following 

changes.
Change the Preset Mode by performing the 

procedure in section “5.1. Selecting a Pre-set Mode”.
Change the Preset by performing the procedure in 

section “5.2. Selecting a Pre-set”.

Change the film speed by performing the procedure 

in section “5.3. Modifying Exposure Parameters”.

Figure 10

 : X-Ray - Ready

Now press 

Exposure Switch

 or 

Remote Exposure 

Button

 on the Doorbell switch to initiate the exposure.

Here the unit prepares itself to deliver the exposure. 

This stage might take a few seconds. Verify that an 

audible beep occurs and the X-Ray status indication 

LED illuminates green.
Stop or abort an exposure by simply pressing any 

key other than the 

Exposure Switch

.

NOTE

The  Exposure  Switch  must  be  kept 

depressed throughout the entire exposure. 

Releasing  the  Exposure  Switch  before 

the  end  of  the  exposure  terminates  the 

emission  with  the  message  displaying 

“X-RAY ABORTED”.

Figure 11 : X-Ray - Exposing

Verify that an audible beep occurs and the screen 

shows the radiation icon while the exposure is 

being delivered. The X-Ray status indication LED 

also illuminates orange.

NOTE

If you need to abort while delivering an 

exposure, simply release the Exposure 

key.

Summary of Contents for X-RAY




































































Reviews: