Hatari 46556, User Manual, Page: 7 / 9

5
DIRECTION OF USE
When turning on the air purifier by touching the switch, the light will appear in position 3. After a short
instance, the light will show the resumed settings of the air purifier’s latest operation before having
been switched off. To turn the air purifier off, touch the ON/OFF switch for about 1.5 seconds.
Switch for adjusting 4 levels of air suction power: 1: low, 2: moderate, 3: strong, 4: very strong,
respectively.
Switch for timing the air purifier’s operation: 1, 2, 4, 8 hours or to cancel timing altogether, respective
to the number of time the sensor is touched. Once set, the timer will indicate the remaining time
left of the duration.
Set the timer while the air purifier is switched on to set the time when the air purifier is to automatically
turn off.
Set the timer while the air purifier is turned off (but it must be plugged in) to set the time when the
air purifier is to automatically turn on. After adjusting the settings, the operating lights will dim.
When the time comes, the air purifier will resume settings of the latest operation before having been
switched off.
Light indicating the operation of Plasma system, which can only be activated using the remote control.
(Cannot be used in conjunction with IONIZER) Touch the switch again to deactivate the function.
Light indicating the operation of Ionize system, which can only be activated using the remote control.
(Cannot be used in conjunction with PLASMA) Touch the switch again to deactivate the function.
An automatic light warning system that keeps track of the length of filter usage, where the light will indicate
when the filter should be changed.
Indicates when the filter has been used for 4,000 hours
Indicates when the filter has been used for 4,250 hours
indicates when the filter has been used for 4,500 hours (The filter should be replaced with a new one)
ON/ OFF
SPEED
TIMER
TIMER OFF
TIMER ON
PLASMA
IONIZER
FILTER CHECK
Large interval blinks
Short interval blinks
Light stays on
CAUTION
Unplug the air purifier before cleaning or changing the components, and when not in use for a long period of time.
Always remove the bag covering the filter before using it.
Used filters should not be cleaned and then reused.
Children should be supervised to ensure they do not play with the appliance. 1.
2.
3.
4.
1.
2.
3.
3.1
3.2
4.
5.
6.
6.1
6.2
6.3
*After changing the filter, press RESET above the control and display panel to turn off the warning light and to reset the filter
usage duration tracking system.
2 4 1 6 5 3
This air purifier is operated by touch screen system and remote control.
Touch screen system
can be activated using fingers
to touch the control and display panel. When the machine is left idle for 30 seconds, the operating lights will dim but the air purifier
will still be operating as normal. By simply touching the control and display panel, the lights will illuminate and the air purifier
will be ready to be adjusted again. Remote control , point the remote signal transmitter in the direction of the signal receiver
on the control and display panel. Avoid having obstructions between the remote signal transmitter and the receiver.
Plug power supply cord into a 220V, 50Hz power socket.