Hasler IM6000 Series User Manual Download Page 152

Page: 152 / 386

Displaying the List of Groups and Accounts

The screen Account list displays the list of groups and accounts that belong to one level
of the structure.

The Level displayed area in the upper right side of the screen indicates the current position
in the group levels.

Status

In the Status area, the supervisor can change the account status:

• Active: this group/account has been created, is activated and will be accessible by

the user.

• Inactive: this group/account has been created, but it is not activated, and will not be

accessible by the user.

Account

Management

and

Access

Control

147

| Page 147 | Oct-05-2016 11:35 |

Summary of Contents for IM6000 Series



































































































































































































































































































































































































Search results

Summary of Contents for IM6000 Series

Reviews:

Hasler IM6000 Series, User Manual, Page: 152 / 386

Search results

Summary of Contents for IM6000 Series

Reviews: