Hasler IM6000 Series, User Manual, Page: 130 / 386

Adding Funds (Postage)
You can add funds to the Mailing System by selecting a specific whole dollar amount. The
Mailing System connects to the Postal Server in order to add postage.
Note
• As supervisor, you can set up a PIN code in the Mailing System to ask for a code
before postage funding: see How to Set/Cancel a Funding Code on page 258.
How to Load Funds
To load funds into the PSD:
1. Either:
Press and select the path: Funds Press or
2. Select Add Funds .
3. If the system asks for a PIN code, enter the code using the keyboard and press [OK] .
The Add funds screen is displayed.
By default, the system displays the value of the previous funding amount.
4. Enter the amount to add using the keyboard (use [Backspace] to clear digits).
4
Postage
and
Funds
Management
125
| Page 125 | Oct-05-2016 11:35 |