Hasler IM5000 Series User Manual Download Page 76

Page: 76 / 363

Running 'No Printing Mail' (Sealing or Counting only)

The Print Mode [

No Printing

] allows you to:

• Run mail for “sealing only” without printing

• Only convey mail – without printing or sealing – for counting or testing purposes.

Recommended Steps for Processing No Printing Mail

Recommended Steps for Processing No Printing Mail Processing mail without printing
requires the following steps:

•

Select the Print Mode

[No printing]

•

Select the sealing mode

if necessary

•

Reset the counter

if necessary

•

Run the mail

Processing

Mail

| Page 71 | Oct-05-2016 10:44 |

Summary of Contents for IM5000 Series












































































































































































































































































































































































Search results

Summary of Contents for IM5000 Series

Reviews:

Hasler IM5000 Series, User Manual, Page: 76 / 363

Search results

Summary of Contents for IM5000 Series

Reviews: