Hasler IM5000 Series User Manual Download Page 270

Page: 270 / 363

LAN Settings

LAN settings can only be performed if the machine is connected to
the LAN at power-up.

How to Set LAN Parameters

You have to connect as a

Supervisor

(see

How to Log in as Supervisor

on page 220).

To set the parameters of the LAN:

As supervisor:

From the main menu, select the path:

Communication settings

LAN settings

In the screens that are displayed next, enter the parameters as required and press

[OK]

to complete screens until you return to the Communications settings screen.

Configuring

the

System

265

| Page 265 | Oct-05-2016 10:44 |

Summary of Contents for IM5000 Series












































































































































































































































































































































































Search results

Summary of Contents for IM5000 Series

Reviews:

Hasler IM5000 Series, User Manual, Page: 270 / 363

Search results

Summary of Contents for IM5000 Series

Reviews: