Hartzell HC-D2MV20-3 Series, Owner'S Manual And Logbook

Page: 34 / 204

Propeller Owner’s Manual
140
INTRODUCTION
61-00-40
Page 1-6
Rev. 2 Jun/12
C. Continued Airworthiness
Operators are urged to keep informed of Airworthiness
information via Hartzell Propeller Inc. Service Bulletins and
Service Letters, which are available from Hartzell Propeller
Inc. distributors or from the Hartzell Propeller Inc. factory by
subscription. Selected information is also available on Hartzell
Propeller’s website at www.hartzellprop.com.
D. Propeller Critical Parts
The following maintenance procedures may involve propeller
critical parts. These procedures have been substantiated
based on Engineering analysis that expects this product
will be operated and maintained using the procedures and
inspections provided in the ICA for this product. Refer to the
Illustrated Parts List chapter of the applicable maintenance
manual for the applicable propeller model for the identification
of specific Propeller Critical Parts.
Numerous propeller system parts can produce a propeller
Major or Hazardous effect, even though those parts may not
be considered as Propeller Critical Parts. The operating and
maintenance procedures and inspections provided in the ICA
for this product are, therefore, expected to be accomplished
for all propeller system parts.
4. Reference Publications
The following publications are referenced within this manual:
Hartzell Propeller Inc. Manual No. 100E (61-10-00) - Hydro-
Selective Propeller Overhaul Manual
Hartzell Propeller Inc. Manual No. 127 (61-16-27) - Spinner
Assembly Maintenance
Hartzell Propeller Inc. Manual No. 130B (61-23-30) - Governor
Overhaul Manual.
Hartzell Propeller Inc. Manual No. 133C (61-13-33) - Aluminum
Blade Overhaul
Hartzell Propeller Inc. Manual No. 165A (61-00-65) - Illustrated
Tool and Equipment Manual
Hartzell Propeller Inc. Manual No. 159 (61-02-59) - Application
Guide - Also available on the Hartzell Propeller Inc. website at
www.hartzellprop.com