Propeller Owner's Manual
115N
INTRODUCTION
61-00-15
Page 1-10
Rev. 24 Dec/20
6. Special Tooling and Consumable Materials
(Rev. 1)
A. Special Tooling
(1) Special tooling may be required for procedures in this
manual. For further tooling information, refer to Hartzell
Propeller Inc. Illustrated Tool and Equipment Manual 165A
(61-00-65).
(a) Tooling reference numbers appear with the prefix “TE”
directly following the tool name to which they apply.
For example, a template that is reference number 133
will appear as: template TE133.
B. Consumable Materials
(1) Consumable materials are referenced in certain sections
throughout this manual. Specific approved materials
are listed in the Consumable Materials chapter of
Hartzell Propeller Inc. Standard Practices Manual 202A
(61-01-02).
(a) Consumable material reference numbers appear
with the prefix “CM” directly following the material
to
which they apply. For example, an adhesive that is
reference number 16 will appear as: adhesive CM16.
Only the material(s) specified can be used.
7. Safe Handling of Paints and Chemicals
(Rev. 1)
A. Instructions for Use
(1) Always use caution when handling or being exposed to
paints and/or chemicals during propeller overhaul and/or
maintenance procedures.
(2) Before using paint or chemicals, always read the
manufacturer’s label on the container(s) and follow
specified instructions and procedures for storage,
preparation, mixing, and/or application.
(3) Refer to the product’s Material Safety Data Sheet (MSDS)
for detailed information about physical properties, health,
and physical hazards of any paint or chemical.
