Propeller Owner's Manual
136
INTRODUCTION
61-00-36
Page 1-11
Rev. 2 Feb/17
B. References to Hartzell Propeller Inc. Publications
NOTE
: Specific Hartzell Propeller Inc. manuals and
service documents are available on the Hartzell
Propeller Inc. website at www.hartzellprop.com.
Refer to the section “Required Publications” in this
chapter for the identification of these publications.
(1) Special tooling is required for procedures throughout
this manual. For further tooling information, refer to
Hartzell Propeller Inc. Illustrated Tool and Equipment
Manual 165A (61-00-65).
(a) Tooling references appear with the prefix “TE”
directly following the tool name to which they
apply. For example, a template which is reference
number 133 will appear as: template TE133.
(2) Consumable materials are referenced in certain
sections throughout this manual. Specific approved
materials are listed in the Consumable Materials
chapter of Hartzell Propeller Inc. Standard Practices
Manual 202A (61-01-02), Volume 7 on the Hartzell
Propeller Inc. website.
(a) The reference number for consumable materials
appear with the prefix “CM” directly following the
material to which they apply. For example, an
approved adhesive that is reference number 16 will
appear as: approved adhesive CM16. Only those
items specified may be used.
