23
Rev 1.5
5 CML setup via Ethernet
The CML can be controlled with the SYScontrol software via Ethernet.
Requirements
•
X86-Computer with Ethernet connection
•
Microsoft Windows XP, Windows 7, 32-Bit and 64-Bit version
Features
•
Setup of the TCP/IP network parameters
•
Global overview of all power supply channels
•
Detailed configuration of the power supply channels
•
Global overview of all temperature sensors
•
Detailed configuration of temperature sensor thresholds
•
Global overview of Fan speed data
•
Detailed configuration of all Fan data
•
Switch power ON / OFF
•
Bus reset
•
Save and reload of configuration data
5.1 Installation SYScontrol
The installation is done in three steps:
1.
Install “net-snmp-x.x.x.exe” NetSNMP is an open source SNMP program which can be
used to access the CML via the Simple Network Management Protocol.
Please see
http://net-snmp.sourceforge.net/ for more details.
2. The HEL-CRATE-MIB.txt (or old Version with WIENER-CRATE-MIB.txt) file must be
stored somewhere on the PC doing the calls, by default that location should be
/usr/share/snmp/mibs.
3. Install
software “SYScontrolInstall-x.x.x.x.exe”
