PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE.
For replacement or lost spare parts please go to
http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product.
ATTENTION:
1.
Please read these instructions carefully before assembly
2.
Aluminium is soft metal and over tightening may strip thread or break the part
3.
DO NOT
use power tools however you will require a 14mm spanner and flat head screw driver to assemble product.
4.
Please allow 30 minutes for assembly.
5.
Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled.
ASSEMBLY STEPS:
1.
LOOSELY
attach the centre plate (B) to the legs (C). Secure using big flat washers (E), big lock washers (F) and nuts (G).
DO NOT
TIGHTEN THE NUTS AT THIS STAGE
2.
Turn the table top (A) upside down on a soft clean surface.
3.
Using flat head screw driver screw the bolts (D) into the table top.
DO NOT TIGHTEN THE BOLTS AT THIS STAGE
4.
Attach the legs (C) to the table top at the points where the bolts (D) have been placed. Then slidebig flat washers (E), big lock washers
(F), and nuts (G) on to the bolt.
DO NOT TIGHTEN THE NUTS AT THIS STAGE.
5.
Tighten all the bolts and nuts with the 14mm spanner one by one being careful not to over tighten any, as this will cause the thread to
become damaged.
6.
Place nut caps (H) on all visible Bolts (D).
7.
Turn the table onto its legs and use the adjuster feet (I) to level the table.
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part No.
Parts list
Parts Picture
Description
Q’ty
Part no.
A
Table Top
1
68767165A
D
(M8*40)
Bolt
3
1000162
B
Centre
Plate
1
67767165B
E
Big Flat
Washer
6
1001162
C
Legs
3
68767165C
F
Big Lock
Washer
6
1002162
G
Nut
6
1003162
H
Nut Cap
3
1004162
I
Screw in
feet
3
1005162
!! Please Note screw in feet (I) are already inserted in the bottom of the
legs (C)
