PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE.
For replacement or lost spare parts please go to
http://spares.hartmanuk.co.uk/purchase
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product.
ASSEMBLY INSTRUCTIONS
Heritage 105cm Square Adjustable Fully Woven Inlaid Casual Dining Table
ATTENTION:
1.
Please read these instructions carefully before assembly
2.
Aluminium is a soft metal and over tightening may strip the thread or break the part
3.
DO NOT
use power tools
4.
Please allow 30 minutes for assembly.
5.
Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled.
ASSEMBLY STEPS:
1.
Remove glass (D) from table top (A), and place table upside down on a clean surface.
2.
Loosely attach leg (B) to the table top (A) using bolts (E) and washer (F)
3.
Tighten all bolts using spanner (H), cover all bolts using nut caps (G)
4.
Turn table top over, place into base (C) gently push until it clicks into place
5.
Carefully place the glass (D) on top of the table top after it is clipped at your desired height
6.
See instructions below for changing table height
For more information regarding maintenance of your furniture please visit
https://www.hartmanuk.com/home
SQUARE ADJUSTABLE TABLE ADJUSTMENT INSTRUCTIONS
1.
For a square adjustable table, one person is required to make the adjustment.
2.
Place foot into the step at the bottom of the table base to stop the table from moving when making the adjustment.
3.
Place hands on either side of the table top, and gently pull until you feel the table unclip from the base frame.
4.
Lift the table top out of the base frame, rotate 90
°,
and gently place back into the base frame. You should now see that the table has been
placed at a different height.
5.
Holding the table top at either side, gently push until you feel it click back securely into the base frame.
6.
Make sure the table top is securely and evenly in place before use. If the Table top is not correctly in place, repeat steps 2 to 5 until you
are happy the table top is secure and at your desired height.
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’ty
Part no.
A
Table Top
1
68040145A
68208145A
68040146A
68208146A
E
40mm*M6
bolts
4
1017162
F
Big Flat
washers
4
1061162
B
Leg
1
68041145B
68209145B
68041146B
68209146B
G
Nut Cap
4
1081162
C
Base
1
68041145C
68209145C
68041146C
68209146C
H
Spanner
1
2100041
D
Glass
1
68040145D
68208145D
68040146D
68208146D
