PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to
http://spares.hartmanuk.co.uk/purchase
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Heritage 170x100cm Adjustable Fully Woven Casual Table
68031145 / 68032145 / 68031146 / 68032146 / 68200145 / 68201145 / 68200146 / 68201146 / 67913003 / 67914003)
ATTENTION:
1.
Please read these instructions carefully before assembly
2.
Aluminium is a soft metal and over tightening may strip the thread or break the part
3.
DO NOT
use power tools
4.
Please allow 30 minutes for assembly
5.
Although assembly only requires 1 person it is advised that a second person be present to help turn the sofa over and into position when
fully assembled
ASSEMBLY STEPS:
1.
Take glass off table top (A), and place top upside down on a clean surface,
2.
Loosely attach middle connection section (B) to table top using bolts (E) and washers (F)
3.
Tighten all bolts using the Allen key (G)
4.
Put the base in desired position, and place table top into the bottom base
5.
Gently push the top until it clicks into place
6.
Carefully place the glass (D) on top of the table top after it is clipped at your desired height
7.
See instructions below for changing table height
For more information regarding maintenance of your furniture please visit
https://www.hartmanuk.com/home
Oblique adjustable table adjustment instructions
1.
For a rectangular adjustable table, two people are needed.
2.
Place foot into the step at the bottom of the table base to stop the table from moving when making the adjustment.
3.
Place hands on either side of the table top, and gently pull until you feel the table unclip from the base frame.
4.
Lift the table top and move slide forward until you feel the top clip into the high adjustment, or to lower table height, lift up the table top a
little bit and move backward to the left direction to adjust to the lowered height.
5.
Once it is in the correct position for your desired table height, gently place the table top back into the slot of the base frame.
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’ty
Part no.
A
Table top
1
68031145A
68031146A
68200145A
68200146A
67913003A
E
M6*40 bolts
4
1006162
B
Middle
connection
section
1
68032145B
68032146B
68201145B
68201146B
67914003B
F
Big Flat
Washers
4
1061162
C
Bottom
base
1
68032145C
68032146C
68201145C
68201146C
67914003C
G
Allen key
1
2002191
D
Glass
1
68031145D
68031146D
68200145D
68200146D
67913003D
