21
English
Manual
6. Technical details
6.1 General
This Multiphase Test Connector does not determine measurement values. It is used to determine the circuit param-
eter (star or delta circuit), the rotating field (clockwise or counter-clockwise) and the connected phases (L1, L2, L3).
This status information is then displayed.
The Multiphase Test Connector was built based on the technical requirements found in the DIN EN 61010-1 standard
“Safety requirements for electrical equipment for measurement, control and laboratory use”.
NOTE:
“Only values qualified with tolerances or limit values shall be considered as guaranteed data. Values without
tolerances are for information purposes only.”
6.2 Features
Nominal voltage
230/400 V AC
Current consumption (per phase)
0.025 A
Current consumption (total)
0.075 A
Size
10 B
Enclosure
Han
®
10 B cable to cable housing
Material
die-cast aluminum
Dimensions (L x W x H)
73 x 43 x 74 mm
Surface
glass bead blasted
Locking mechanism
single locking lever
Insert
Han
®
10 E-M
Contacts
Han E, silver plated
Weight
approx. 0.4 kg
Displays
LEDs
Mating cycles
≥ 500
Degree of protection
IP54
6.3 Contact assignments
PIN /
Contact
1
L1 (U1)
2
L2 (V1)
3
L3 (W1)
4
n.c.
5
n.c.
6
W2
7
U2
8
V2
9
TF
10
TF
