Hartig+Helling MBF 8181, Operating Instructions Manual

Page: 15 / 68

15
GB
1. STANDARD ACCESSOIRES
- 1 x Baby unit
- 1 x Parent unit
- 1 x 6V AC switching power supply for baby unit
- 1 x 6V AC switching power supply for parent unit or rapid charger
- 1 x Intelligent rapid charger
- 1 x 3.6V NiMH rechargeable battery pack
- 1 x User manual
2. PRECAUTIONS
• Please read the operating instructions carefully before using the equipment! This ensures
maximum performance & extended service life of the MBF.
• Only use original accessories. The use of other parts may cause damage to the MBF 8181 baby
monitor.
• If the baby monitor will not be used for a longer period of time, remove all batteries from the
units to prevent damage due to battery leakage.
• Disconnect the AC switching power supply from the power source when the monitor is not
being operated.
• The MBF 8181 works best within a temperature range of -9°C to +50° C.
• Do not expose the units to direct sunlight or moisture or place near any heat source for a
longer time. Do not use in an excessively dusty environment.
• Do not place the transmitter in a baby’s cot or playpen.
• Always place the equipment out of reach of small children.
• Safe operation is no longer guaranteed if the equipment has visible damage or is no longer
functioning correctly.
• Do not open any part of the units or their accessories; only an authorized specialist may carry
out maintenance, adaptation and repair work.
WARNING
The MBF 8181 baby monitor should not be regarded as a medical device. Premature
babies or those considered to be at risk should be under the supervision of your
doctor or medical personnel. It is strongly recommended to supervise your baby at a
regular interval, in addition to using the MBF 8181.