Hartford Industrial Co., Ltd.
NO
CG
10.Electrical system
Page
10-3
10.3 Regulator
Figure 1 : Armature Coil in regulator produces AC
SCR(S1,S2) can drain the left energy .
signal Y(yellow line) P (pink line) to input
to D1,D2,D3,D4 it will change AC signal
to DC signal and control circuit . The purpose
to examine R(red line)(which looks battery
and load is to find out how much energy
charge and the usage of load .
to provide adeguate Voltage for the battery
The main job of regulator is to regulate and
needs to send power for Battery Charge .
by coutrolling circuit to know whether it
should be .
signal . To examine the Voltage of Battery
must pass through regulator to change DC
generates Voltage . to AC signal . Thus , it
REG RELT COMP : As a result magnetor Armature Coil
Figure 1
66
69
31
紅(R)
綠(G)
粉紅(P)
黃(Y)
黑(B)
