manualshive.com logo in svg

Hart Sceintific DewK 1620, User Manual

Share
Download
Hart Sceintific DewK 1620 User Manual Download Page 131

Example: SYST:PASS:NEW 1212

The <pass> parameter must be a 4-digit number (0000 to 9999). Specifying the
DEF parameter resets the password to the default password (1620). This com-
mand is password protected.

Note:

If the password is forgotten, the themo-hygrometer must be returned

to an Authorized Service Center to have the password restored.

8.4.10.7

SYSTem:PASSword:RECord?

Returns the state of data recording settings password-protection.

Example: SYST:PASS:REC?

Response: 0

A value of 1 is returned if data recording password settings are password-pro-
tected; otherwise a value of 0 is returned.

8.4.10.8

SYSTem:PASSword:RECord <bool>

Sets the state of data recording settings password-protection.

Example: SYST:PASS:REC 1

The <bool> parameter turns the data recording password-protecton on (1 or
ON) or off (0 or OFF). This command is password protected. Commands pro-
tected with this setting are: DATA:REC:CLE, DATA:REC:FEED:RHUM,
DATA:REC:FEED:TEMP, and DATA:REC:TIM.

8.4.10.9

SYSTem:PASSword:SENSor?

Returns the state of the sensor settings password-protection.

Example: SYST:PASS:SENS?

Response: 0

A value of 1 is returned if the sensor settings password-protection is enabled.
Otherwise, a value of 0 is returned.

8.4.10.10

SYSTem:PASSword:SENSor <bool>

Sets the state of the sensor settings password-protection.

Example: SYST:PASS:SENS 1

The <bool> parameter turns the sensor settings password-protection on (1 or
ON) or off (0 or OFF). This command is password protected. Commands pro-
tected with this setting are: CALC:PAR:DATE:TIME, CALC:PAR:RES,

124

Hart Scientific

8 Digital Communications Interface

Summary of Contents for DewK 1620































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands