SHE-002
2.5m Aluminium Team Shelter
INS102
Revision 15
04/05/2017
Harrod UK Limited
©
Code:
Product:
Pack Contents:
View of Shelter
When fixing frame together,
please use a stainless steel
washer on each bolt.
14
7
1
12
2
4
6
3
13
10
8
9
15
5
1 x FEQ860 SIDE FRAME PACK
1 x FEQ755 BOTTOM & BACK SUPPORTS
1.
1 x L/H Sideframe
(PEP860)
2.
1 x R/H Sideframe
(PEP861)
3.
1 x Bottom Back Support
(PEQ755)
4.
2 x Centre/Top Back Support
(PEQ756)
5.
1 x Top Front Support
(PEQ758)
6.
1 x 2.5m Front Flash Angle
(PEP538)
7.
2 x Seat Supports
(PEQ792)
8.
2 x Plastic Seat Slats
(PLP625)
9.
2 x Clear Polycarbonate Side Sheet
(PLP200)
10.
1 x Polycarbonate Roof Sheet
(PLA755)
1 x FEQ792 SEAT SUPPORT FRAME
1 x FEQ756 SEAT SLATS
1 x FEQ761 SIDEFRAME PLASTIC
1 x FEQ759 ROOF SHEET PLASTIC
(pair)
1 x FEQ763 BACK SHEET PLASTIC
1 x FEQ723 FLASHING
1 x FPK630 FITTINGS PACK
11.
1 x Polycarbonate Back Sheet
(PLP202)
12.
1 x Back Trim Angle
(APP723)
13.
1 x L/H Back Vertical Angle
(APP724)
14.
1 x R/H Back Vertical Angle
(APP726)
15.
2 x Roof End Angle
(APP725)
16.
8 x M8 Nyloc Nut BZP
(BOL402)
17.
4 x M8 x 100 Button Head
(BOL445)
18.
4 x M8 x 70 Button Head
(BOL488)
19.
4 x M8 x 40 Hex Head Bolt STST
(BOL520)
20.
14 x M8 x 25 Set Screw STST
(BOL540)
21.
34 x M8 x 20 Set Screw STST
(BOL546)
22.
64 x M8 Washer STST
(BOL715)
23.
2 x 50 Plastic Square End Cap
(CAP108)
(including Fittings Pack)
(Packed in FEQ723)
16
17
19
18
20
21
22
23
15
Bolt Identification
TOOLS REQUIRED
1 x 13mm Spanner
1 x Large Flat Head Screwdriver
4
9
11
23
23
24
24
IMPORTANT NOTES
Three people are required to safely assemble this shelter.
This shelter must be assembled on a flat surface. Failure to
do this may result in bolt hole misalignment.
Please read these assembly instructions
carefully before starting to assemble
your shelter.
When the shelter is fully assembled it
be anchored to
prevent movement and toppling. Please see page 3 or speak
to your distributor for anchoring options.
must
