Harrison Mixbus VBM User Manual Download Page 41

Page: 41 / 67

MIXBUS VBM

2 December 2021

2.4.1.4 Lower Section

The lower section of the Program bus strip is identical to that of the Channel strip, and all

indicators and controls operate identically to those on the Input channel strip.

These are:



Panner



Bus Slate



Bus Mute and Bus PFL buttons



Fader and Output level displays



Fader



Bus metering



Group selector



Metering point selector



VCA assign button (present *if* VCAs have been created)

Review Sections

2.2.7

through

2.2.14

for details on the operation of this section of the

Program bus strip.

2.4.1.5 Sends Section

If the "Show Individual Gain Controls" box shown in

Figure 29

is checked, the Sends section

will be displayed. The Sends section provides additional level control and pan capabilities from
each Input and Contributor channel routed to this Program bus.

Figure 31

shows the Program

bus master with the Sends section displayed.

Summary of Contents for Mixbus VBM




































































Search results

Summary of Contents for Mixbus VBM

Reviews:

Related manuals for Mixbus VBM

Brands by name

Popular brands

Harrison Mixbus VBM, User Manual

Search results

Summary of Contents for Mixbus VBM

Reviews:

Related manuals for Mixbus VBM

Brands by name

Popular brands