3-6
RF-7800W
SYSTEM ADMINISTRATION AND CONFIGURATION
R
3.5.2.1
Addressing
The subsections below describe Addressing configuration parameters. All parameters for Addressing can be
accessed using GUI, CLI, and SNMP interfaces.
3.5.2.2
IP Address
This is the IP address of the radio's management interfaces. The factory default address is
192.168.26.2
.
3.5.2.3
Subnet Mask
This is the subnet mask of the radio's management interfaces. The factory default for this address is 255.255.255.0,
which means that only devices with a 192.168.26.x IP address can access the radio.
3.5.2.4
Default Gateway
This is the default gateway of the radio's management interfaces. The factory default for this address is 192.168.26.1.
If access to the radio's management interfaces is needed from multiple subnets, this address must be the IP address
of a router that can forward traffic to and from those subnets.
GUI CLI SNMP
Summary of Contents for RF-7800W-OU49 series
