4 – Front Panel Configuration & Operation
HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation
4-47
Intraplex Products
Figure 4-75. Firmware and File Management
Firmware Management
Firmware Upgrade:
Select this command and press Enter to go to the
Firmware
Upgrade
screen
and begin upgrading the system firmware to the current version.
Firmware Rollback:
Select this command and press Enter to set the equipment to the previously
installed firmware version (that is, the version installed immediately before the current version).
Export System Files:
Select this command and press Enter to go to the
Export System Files
screen.
Firmware Version Information:
Select this command and press Enter to go to the
Firmware
Version
screen.
Back:
Select this command and press Enter to return to the previous screen.
Firmware Upgrade
Select
Firmware
Upgrade
on the
Firmware
Management
screen to access the
Firmware
Upgrade
screen (Figure 4-76).
Figure 4-76. Firmware Management
Firmware Upgrade
From Internal:
Press Enter with this command selected (default) to access a
Select
File
screen
similar to the example shown (Figure 4-77) to select the upgrade file and begin the upgrade
process. “Internal” refers to the contents of internal flash memory at a specific directory:
“/RFA/user/”.
Note:
Due to memory constraints, you should only retain one package file on the internal flash.
If you want to keep more files, save them to a USB device and then delete them from the
internal flash.
From USB:
Select this command and press Enter to obtain firmware from a USB device and begin
the upgrade process. A screen similar to Figure 4-77 appears if the system detects more than one
file on your USB device. If the system does not detect a USB device, a screen appears with that
message (Figure 4-78). Firmware Upgrade only affects files in the root directory of the USB
device. This system recognizes USB devices with 2 GB or less memory or formatted with a
partition for 2 GB or less memory.