HD Link Installation & Operation Manual
4 – Front Panel Configuration & Operation
Version 2, April 2010
4-44
Harris Corporation
Intraplex Products
Figure 4-69. Main
Test Menu – Transmitter and Receiver
Test Tone:
(Transmitter Only) Select this command and press Enter to access the
Test Tone
screen
and test the audio being transmitted through ports 1 and 2.
Audio Monitor:
(Receiver Only) Select this command and press Enter to access the
Audio
Monitor
screen and test the audio monitor level from port 1 and port 2.
Back:
Select this command and press Enter to return to the previous screen.
Figure 4-70 shows a flow chart of screens to which you can drill down from the
Test
menu option.
Test Tone - Tx
Audio Port 1
Audio Port 2
Aux Port 1
Aux Port 2
Test
Audio Monitor - Rx
Monitor Source
Monitor Level
Figure 4-70. Test Levels Flow Chart
4.1.7.1 Test Tone
Select
Test Tone
on the
Test
screen to access the
Test Tone
screen (Figure 4-71), a transmitter
test.
Figure 4-71. Test
Test Tone – Transmitter
Audio Ports 1 and 2:
These fields indicate whether the port is
Linear
or
Compressed
.
Select one of these ports and press Enter to toggle between ON and OFF for the test tone on the
selected port:
●
Audio Port 1
●
Audio Port 2
●
Aux Port 1
●
Aux Port 2