Harris Intraplex HD Link RF, Installation & Operation Manual, Page: 75 / 181

4 – Front Panel Configuration & Operation HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation 4-41
Intraplex Products
• 16 ksps
• 24 ksps
• 32 ksps
• 44.1 ksps
• 48 ksps
For linear audio ports, you can set the sample rate to 32 ksps , 44.1 ksps , or 48 ksps . For
compressed audio ports, you can set the sample rate to 16 ksps , 24 ksps , 32 ksps , 44.1 ksps ,
or 48 ksps .
● Right field – For compressed audio ports, press the up or down arrow (

) to change the Word
Length to one of these bits:
• 16
• 20
• 24
You cannot change the word length for linear audio ports.
Audio 2: Press the up or down arrow (

) to navigate to the Audio 2 row (Figure 4-66) and then
press the left or right arrow (

) to select a parameter field to change on the Audio 2 row:
Figure 4-66. Service Profile: Audio 2 Port Mode
● Left field – Press the up or down arrow (

) to change the Port Mode to one of these options:
• Mono
• Stereo
• Off
● Middle field – Press the up or down arrow (

) to change the Sample Rate to one of these rates:
• 16 ksps
• 24 ksps
• 32 ksps
• 44.1 ksps
• 48 ksps
For linear audio ports, you can set the sample rate to 32 ksps , 44.1 ksps , or 48 ksps . For
compressed audio ports, you can set the sample rate to 16 ksps , 24 ksps , 32 ksps , 44.1 ksps ,
or 48 ksps .
● Right field – For compressed audio ports, press the up or down arrow (

) to change the Word
Length to one of these bits:
• 16
• 20
• 24
You cannot change the word length for linear audio ports.
Aux 1: Press the up or down arrow (

) to navigate to the Aux 1 row (Figure 4-66) and then press
the left or right arrow (

) to select a parameter field to change on the Aux 1 row:
● ON or OFF
● Data Rate - HRS or APT