HD Link Installation & Operation Manual
4 – Front Panel Configuration & Operation
Version 2, April 2010
4-40
Harris Corporation
Intraplex Products
4.1.6.3 Service Profile
Select
Service Profile
on the
Service Setup
screen to access the
Service Profile
screen (Figure 4-
64).
Figure 4-64. Service Setup
Service Profile – Transmitter and Receiver
Note:
If the message
No changes, Service Sync is ON
appears on the receiver screen, this screen
is locked; you must set the Service Sync
OFF
(Section 4.1.6.4) before making any changes to
parameters on this screen.
Audio 1:
Press the left or right arrow (
) to
select a parameter field to change on the
Audio 1
row
(Figure 4-65):
Figure 4-65. Service Profile: Audio 1 Port Mode
Note:
When you select a field, the message at the bottom of the screen identifies the field (such as
Port Mode
) and gives instructions on changing the parameter (such as
Up/Down to
change
).
●
Left field – Press the up or down arrow (
)
to change the
Port Mode
to one of these options:
•
Mono
•
Stereo
•
Off
●
Middle field – Press the up or down arrow (
) to change the
Sample Rate
to one of these rates:
Message