Harris Constellation, Installation & Maintenance

Page: 120 / 292

Constellation™ November 2003
6-10 IP Communication Stack and IP Applications
Trap Management
Traps are sent to all the managers listed in the Trap Destination table. The trap
mechanism is user-configurable through the Keypad.
Table 6-10: Trap management
SNMP Submenu Selection Explanation
TRAP TIMEOUT
(SEC)
xxx
The time between resending the same
trap message (= 0 if the Trap Repeat is 0)
Default: 10 seconds
TRAP REPEAT xxx
The number of the same trap message
sent if the network manager does not poll
the system (acknowledge)
TRAP COMMUNITY Constellation Community name of a trap
Disable Traps
Trap messages can be disabled or
enabled. All trap messages can be
disabled as a group, or each trap message
can be configured individually. See
page B-11
.
Table 6-11: Disable Traps
DISABLE
TRAPS
Submenu
Selection Explanation
ALL TRAPS DISABLE ALL
All trap messages can be disabled as a
group, or.
CFG
Individually each trap message can be configured
individually.
36 traps messages
See
page B-11.
Enable/Disable
Each trap message can be disabled or
enabled individually.