Harris Constellation, Installation & Maintenance

Page: 118 / 292

Constellation™ November 2003
6-8 IP Communication Stack and IP Applications
REBOOT SYSTEM
IP parameter changes must be set by rebooting the SPU
Controller. Choose the REBOOT SYSTEM command
(
page B-10
) from the Keypad menu.
SNMP Agent Configuration
The Constellation SNMP is compliant with SNMP V1 (RFC 1157).
Management Information Base (MIB)
To access the Constellation MIB, go to the Harris Premier Customer Site:
https://premier.harris.com/microwave/
or call the Technical Assistance Center (page xv) .
Allowed NMS
To poll the agent, the manager is registered as an “allowed manager”. Using
their IP addresses, up to 10 managers can be registered at a time.
A request from an NMS that is not allowed is denied.
SNMP Managers
Two tables are defined. SNMP Managers table and Trap Destinations table. A
manager can be specified in both tables or in either one of them.
Allowed SNMP managers are defined through the Keypad.
Table 6-7: REBOOT SYSTEM
NETWORK
MANAGEMEN
T Submenu
Selection Explanation
REBOOT SYSTEM YES
Reboots the SPU Controller. This procedure is
not traffic-affecting.