Installation Guide
Issue 1, December 1999
IGD-201627-E01
Microwave Communications Division - ISO 9001 Certified
Components
Make sure you have the following components before starting this installation procedure.
Reference Manual
Software
N-type Cable
Flat-panel Antenna
(with installation instructions)
Aurora 5800 Spread Spectrum Digital Microwave Radio
Tools and test equipment you will need:
Voltmeter
T1 or E1 Test Set
Set of screwdrivers
Set of wrenches
The following are supplied with the radio:
Recommended antenna* and cable*
* optional
Includes
weatherproofing kit
CAUTION! To prevent equipment damage and
shock hazard caused by lightning, antenna
installation and the grounding system must
comply with NEC or IEC standards, and local
regulatory requirements.
NOTE: Harris
does not provide
grounding kits.
23.5 in.
2
3
.5
i
n
.
Prepare the radio for a rack-mounting installation.
1
Rack Installation
Rack-mounting hardware
may be moved for “forward”
or “recessed” mount.
