Harris assuredcommunications X75-RCP, Installation And Operation Manual

Page: 39 / 99

Control Panels for X75 Systems Installation and Operation Manual 17
Chapter 2: Operation via Front Panel Controls
Video Proc Amp Settings
The four most commonly used video processing controls are available
from the control panel as shortcuts. With a single video input, you can
directly access each proc amp parameter by pressing one button. When
you are working with multiple video sources, first press
Ctrl + V Proc
to switch between the video proc amps of the selected video sources.
(The VFD briefly displays the selected video proc amp.) Then press the
proc amp parameter buttons.
Figure 2-5. Video Proc Amp Control Area
There are four internal input video proc amps: HD-SDI, SD-SDI 1,
SD-SDI 2, and Analog.
•
HD-SDI 1, HD-SDI 2, and HD-SDI Fiber inputs share the HD
video proc amp.
• SD-SDI 1 input has its own dedicated SD-SDI 1 video proc amp.
• SD-SDI 2 input has its own dedicated SD-SDI 2 video proc amp.
• Composite, S-video and CAV inputs share the analog video proc
amp.
The four most commonly used video processing controls are available
from the control panel as the hot buttons, and include the following:
•
Luma : Can be mapped to Analog Luma Gain, SD-SDI 1 Luma
Gain, SD-SDI 2 Luma Gain, HD-SDI Luma Gain
• Black : Can be mapped to Analog Black Level, SD-SDI 1 Black
Level, SD-SDI 2 Black Level, HD-SDI Black Level
Press CTRL and V Proc
The corresponding Video Proc LED lights
during input selection
Select a shortcut proc amp control